一、Production description： 

A panel saw is a type of saw that is mainly composed of a saw blade and a saw frame. The saw blade is generally a relatively narrow and thin sheet, usually relatively wide, installed on the saw frame, and is used to saw materials such as wood.

二、use： 

1：Aim the saw blade at the part you want to cut, preferably starting from the side or below the object.

2：When sawing near the end of an object, reduce the force of the sawing, because the material fibers at the end of the object are relatively fragile. Excessive force may cause the object to break suddenly, generating a large impact force, which may damage the saw blade or injure the operator.

3：Make sure the height and shape of the teeth are consistent to avoid a situation where some teeth are high and some are low.

三、Performance has advantages：

1：The teeth of the panel saw are specially designed and processed. For example, the special teeth can avoid sawdust accumulation. During the sawing process, no matter whether the texture of the wood is straight, horizontal or oblique, it can achieve relatively smooth sawing, making the surface of the wood after sawing relatively flat, reducing the workload of subsequent processing.

2：The panel saw is relatively small in size and light in weight, making it easy to carry and operate.

3：The structure of the panel saw is relatively simple, and the maintenance and care work is relatively easy.

四、Process characteristics

(1)The teeth of a panel saw are usually designed to be fine and sharp, which allows it to produce relatively smooth and glossy cuts during the cutting process, reducing the tearing of wood fibers and the generation of burrs, making the cut surface smoother and more beautiful.

(2)Depending on the type and size of the panel saw, it can be operated by a single person, such as a small manual panel saw, or in some large panel processing or mass production scenarios.

(3) After cutting, some precision panel saws can achieve a similar effect to the edge of the board after planing, with a smooth surface, without the need for additional planing, saving subsequent processing steps and time.

(4)The maintenance of panel saws mainly includes regularly cleaning wood chips and dust from the saw blades, checking the wear of the saw blades and replacing them in time, lubricating the transmission parts, etc. Its structure is relatively simple, the parts are easy to disassemble and replace, and the maintenance cost is low.