一、Production description： 

The unique fish pattern is decorative and provides a good anti-slip effect, ensuring that it will not slip out of your hands during use.

二、use： 

1：Aim the saw blade at the part you want to cut, preferably starting from the side or below the object.

2：When sawing near the end of an object, reduce the force of the sawing, because the material fibers at the end of the object are relatively fragile. Excessive force may cause the object to break suddenly, generating a large impact force, which may damage the saw blade or injure the operator.

3：Make sure the height and shape of the teeth are consistent to avoid a situation where some teeth are high and some are low.

三、Performance has advantages：

1：Fish pattern handle folding saws usually use high-quality steel to make saw blades. After a special heat treatment process, its teeth are sharp and can easily saw various woods, branches and other materials.

2：The connection structure between the fish pattern handle and the saw blade is firm. During the sawing process, the saw blade will not shake or deviate, ensuring the accuracy and safety of sawing.

3：When the saw is folded, the teeth are hidden inside the handle, avoiding accidental injuries that may be caused by exposed teeth.

四、Process characteristics

（1）These steels have high hardness and toughness. After proper heat treatment, they can ensure the sharpness and wear resistance of the saw blade, allowing it to easily saw various woods, branches and other materials.

（2）The dimensional accuracy requirements of saw blades are high, and parameters such as the length, width, and thickness of the saw blades need to be strictly controlled within a certain tolerance range.

（3）During the assembly process, it is necessary to ensure that the saw blade and the handle are installed in the correct position and that the saw blade can be unfolded and folded smoothly.

（4）These surface treatment processes can form a protective film on the surface of the saw blade, isolating it from air and moisture and preventing the saw blade from rusting.