一、Inkcazelo yemveliso: 

Isarha yeclevis idla ngokuba nencakuba yesarha, isarha yomva kunye nomqheba. Incakuba yesarha ibhityile ngokubanzi, inobubanzi obuphakathi kunye nobukhulu obubhityileyo, nto leyo eyenza ukuba ibe bhetyebhetye xa usika kakuhle. I-saw back inobunzima kwaye yomelele, ngokuqhelekileyo yenziwe ngentsimbi ephezulu, enika inkxaso ezinzileyo kwi-saw blade kwaye iqinisekisa ukuba i-saw blade ayiyi kugoba okanye iguqule ngokulula ngexesha lokusika. Isibambo siyilwe ngokuhambelana nemigaqo ye-ergonomic kwaye ikhululekile ukubamba, okwenza kube lula kubasebenzisi ukuba basebenze ngaphandle kokudinwa ngexesha leeyure ezinde zokusebenza.

二, sebenzisa: 

I-1:Ifaneleke kakhulu ukusika okuthe ngqo kunye nokugobileyo, ngakumbi ukwenza umthi ocolekileyo njenge-mortise kunye nesakhiwo se-tenon, ukukrola, njl.

2: Iyakwazi ukusika ngokuchanekileyo i-tenons kunye ne-mortises yeemilo ezahlukeneyo, ibonelela ngokudityaniswa okuchanekileyo kwe-splicing yokwenza umthi.

I-3: Xa usenza iimodeli, isarha yangasemva ingasetyenziselwa ukusika iibhodi zomthi ezicekethekileyo, iibhodi zeplastiki kunye nezinye izinto ukuhlangabezana neemfuno zamalungu amahle ekwenzeni imodeli.

三, Ukusebenza kunenzuzo:

1:I-saw blade yesarha yangasemva ihlala imxinwa kwaye ibhityile, nto leyo eyenza ukuba ikwazi ukusika ngokuthe ngqo kwimigca emiselweyo ngexesha lomsebenzi wokusika. Ifaneleke ngakumbi umsebenzi ofana nokuveliswa kwesakhiwo se-mortise kunye ne-tenon kunye nokukrolwa okuhle okudinga ukuchaneka okuphezulu.

2:Amazinyo acwangciswe ngokusondeleyo kwaye ngokulinganayo. Olu luyilo lunokwenza inkqubo yokusarha ibe lula, inciphise ukutsiba okanye ukuphambuka kwamazinyo emthini, kwaye iphucule ngakumbi ukuchaneka kokusika.

3: Kuba iblade yesarha yesarha yokuqinisa incinci kwaye inenqanaba elithile lokuguquguquka (ezinye iisarha ezibambezelayo), kwezinye iimeko apho ukusika okugobileyo okanye ukusika okukhethekileyo kuyadingeka, umsebenzisi unokulungelelanisa ngokuguquguqukayo i-angle kunye nesalathiso sesixhobo. isarha yesarha njengoko kufunekayo ukuhlangabezana neemfuno ezahlukeneyo zokusika.

四、 Iimpawu zenkqubo

(1)Amazinyo esarha eklishwayo aqhele ukuba mancinci, asondelelane, kwaye aneengile ezincinci zehariki.

(2) I-saw blade ye-saw back idla ngokusetyenziswa kwizinto ezifana ne-carbon steel high okanye i-alloy steel. Ezi zixhobo zinobunzima obuphezulu kunye nokuxhatshazwa kokugqoka, okunokuqinisekisa ukuba i-saw blade ayilula ukuyinxiba okanye ukonakala ngexesha lokusetyenziswa kwexesha elide.

(3)Isarha yomva yesarha yesarha idla ngokuthatha isakhiwo esibambe umva, oko kukuthi, ipleyiti yentsimbi okanye ibhodi yeplanga ibotshelelwe ngasemva kwincakuba yesarha ukwandisa ukomelela nokuzinza kwencakuba yesarha.

4